Name: Tax Lots

Display Field: SSL

Type: Feature Layer

Geometry Type: esriGeometryPolygon

Description: DC's Real Property Tax Administration defines assessment and taxation lots, often referred to as A&T lots or simply tax lots. These lots are strictly for real estate taxation purposes and normally defined under two circumstances: When property owners ask for their real property tax bills to be consolidated, after they have bought several contiguous record lots; this is called a combine;When part of a record lot is sold, but no new record lot is yet defined; this is called a split request. Tax lots are not determined by survey, and are therefore not official lots in the same way record lots are. These lots are normally numbered between 800 and 1999within a square to differentiate them from record lots on the property tax maps. When a tax lot is established by RPTA, an A&T Plat is generated by RPTA and forwarded to the surveyor’s office. These A&T Plats are not reviewed but simply filed by the Surveyor; they do not comply with the standards required of subdivision plats, and are not recorded. Tax Lots are not normally acceptable when applying for building permits and must be converted to Record Lots through the normal subdivision process involving the D.C. Surveyor’s Office before permits will be issued. The only exception is if the lot does not face a public street. Furthermore, at the time of their creation and platting, there is no review made of tax lots for compliance with D.C. Zoning, Subdivisions or any other ordinances. These lots are simply pieces of property, owned by somebody, described in deeds, for which tax bills are sent and real estate taxes are collected by the city. Some Record Lots also function in this capacity. Geographically, tax lots typically overlay layers such as record lots or sometimes reservations. There are known instances where tax lots do not overlay these types of layers. Up until approximately 1972, A&T lots were only created by the Tax Assessor out of lands that had been previously Record Lots at some point in their history. For a short period of time in the early to mid 1970’s, a decision was made to start eliminating fractional parcels (see definition below) and make them all into A&T lots. The intent was to do away with Parcels altogether and have all properties in the city be either tax lots or record lots. By doing this, they converted unsubdivided parcels into A&T lots where no underlying record lot exists. There is often little or no historical source information about these types of transactions therefore vectorizing them often required vast amounts of research.

Copyright Text: Department of Buildings

Default Visibility: false

MaxRecordCount: 2000

Supported Query Formats: JSON, geoJSON, PBF

Min Scale: 5000.0

Max Scale: 0.0

Supports Advanced Queries: true

Supports Statistics: true

Has Labels: true

Can Modify Layer: true

Can Scale Symbols: false

Use Standardized Queries: true

Supports Datum Transformation: true

Extent:

XMin: -8584306.575194765
YMin: 4694540.216206643
XMax: -8561633.61246416
YMax: 4721096.396098438
Spatial Reference: 102100  (3857)  LatestVCSWkid(0)

Drawing Info:

Renderer:
Simple Renderer:
Symbol:
Style: esriSFSSolid
Color: [163, 255, 115, 255]
Outline:
Style: esriSLSSolid
Color: [38, 115, 0, 255]
Width: 0
Label: N/A
Description: N/A
Transparency: 25
Labeling Info:

Advanced Query Capabilities:

Supports Statistics: true
Supports OrderBy: true
Supports Distinct: true
Supports Pagination: true
Supports TrueCurve: true
Supports Returning Query Extent: true
Supports Query With Distance: true
Supports Sql Expression: true
Supports Query With ResultType: false
Supports Returning Geometry Centroid: false
Supports Binning LOD: false
Supports Query With LOD Spatial Reference: false
Supports Percentile Statistics: true
Supports Having Clause: true
Supports Count Distinct: true
Supports Time Relation: true
Supports Sql Format: false
Supports Query Analytic: true
Supports Query With Current User: true

HasZ: false

HasM: false

Has Attachments: false

HTML Popup Type: esriServerHTMLPopupTypeNone

Type ID Field: null

Fields:

• CREATION_DT ( type: esriFieldTypeDate, alias: CREATION_DT, length: 8 )
• RECORDATION_DT ( type: esriFieldTypeDate, alias: RECORDATION_DT, length: 8 )
• NARRATIVE ( type: esriFieldTypeString, alias: NARRATIVE, length: 200 )
• EXPIRATION_DT ( type: esriFieldTypeDate, alias: EXPIRATION_DT, length: 8 )
• STATUS ( type: esriFieldTypeInteger, alias: Status , Coded Values: [1: Current] , [2: Dead] )
• SQUARE ( type: esriFieldTypeString, alias: SQUARE, length: 50 )
• SUFFIX ( type: esriFieldTypeString, alias: SUFFIX, length: 50 )
• LOT ( type: esriFieldTypeString, alias: LOT, length: 40 )
• LOT_TYPE ( type: esriFieldTypeInteger, alias: LOT_TYPE , Coded Values: [1: Record_Lot] , [2: Tax_Lot] , [3: Air_Rights] , ...3 more... )
• COMPUTED_AREA_SF ( type: esriFieldTypeDouble, alias: COMPUTED_AREA_SF )
• SURVEYED_AREA_SF ( type: esriFieldTypeDouble, alias: SURVEYED_AREA_SF )
• IS_REAR_OF ( type: esriFieldTypeInteger, alias: IS_REAR_OF , Coded Values: [1: Yes] , [0: No] )
• BLDG_NUM ( type: esriFieldTypeInteger, alias: BLDG_NUM )
• BLDG_NUM_EXT ( type: esriFieldTypeString, alias: BLDG_NUM_EXT, length: 20 )
• BLDG_NUM_END_RANGE ( type: esriFieldTypeInteger, alias: BLDG_NUM_END_RANGE )
• BLDG_EXT_END_RANGE ( type: esriFieldTypeString, alias: BLDG_EXT_END_RANGE, length: 40 )
• QUADRANT ( type: esriFieldTypeString, alias: QUADRANT, length: 40 )
• ZIP5 ( type: esriFieldTypeString, alias: ZIP5, length: 5 )
• ZIP4 ( type: esriFieldTypeString, alias: ZIP4, length: 4 )
• RECORD_AREA_SF ( type: esriFieldTypeDouble, alias: RECORD_AREA_SF )
• CONV_TOLERANCE_TYPE ( type: esriFieldTypeInteger, alias: Conv_Tolerance_Type , Coded Values: [1: Type_1] , [2: Type_2] , [3: Type_3] )
• CONV_TOLERANCE_VALUE ( type: esriFieldTypeDouble, alias: CONV_TOLERANCE_VALUE )
• CONV_TOLERANCE_RESOLUTION ( type: esriFieldTypeString, alias: CONV_TOLERANCE_RESOLUTION, length: 40 )
• TAXLOTSPLYID ( type: esriFieldTypeInteger, alias: TAXLOTSPLYID )
• PARCELSPLYID ( type: esriFieldTypeInteger, alias: PARCELSPLYID )
• SQUAREPLYID ( type: esriFieldTypeInteger, alias: SQUAREPLYID )
• BOOK_NUM ( type: esriFieldTypeString, alias: BOOK_NUM, length: 40 )
• PAGE_NUM ( type: esriFieldTypeString, alias: PAGE_NUM, length: 40 )
• ACCOUNT_ID ( type: esriFieldTypeString, alias: ACCOUNT_ID, length: 40 )
• IS_THEORETICAL_LOT ( type: esriFieldTypeInteger, alias: Is_Theoretical_Lot , Coded Values: [1: Yes] , [0: No] )
• EFFECTIVETAXYEAR ( type: esriFieldTypeDate, alias: EFFECTIVETAXYEAR, length: 8 )
• CONDO_REGIME_NUM ( type: esriFieldTypeString, alias: CONDO_REGIME_NUM, length: 50 )
• UNDERLIES_CONDO ( type: esriFieldTypeInteger, alias: Underlies_Condo , Coded Values: [1: Yes] , [0: No] )
• CONDO_BOOK_NUM ( type: esriFieldTypeString, alias: CONDO_BOOK_NUM, length: 40 )
• CONDO_PAGE_NUM ( type: esriFieldTypeString, alias: CONDO_PAGE_NUM, length: 40 )
• KILL_DT ( type: esriFieldTypeDate, alias: KILL_DT, length: 8 )
• SSL ( type: esriFieldTypeString, alias: SSL, length: 50 )
• COL ( type: esriFieldTypeString, alias: COL, length: 2 )
• SHAPE ( type: esriFieldTypeGeometry, alias: Shape )
• SHAPE.AREA ( type: esriFieldTypeDouble, alias: AREA )
• SHAPE.LEN ( type: esriFieldTypeDouble, alias: LEN )
• MAR_ID ( type: esriFieldTypeInteger, alias: MAR_ID )
• OBJECTID ( type: esriFieldTypeOID, alias: OBJECTID )

Supported Operations:   Query   Query Attachments   Query Analytic   Generate Renderer   Return Updates

  Iteminfo   Thumbnail   Metadata